There are four different products in this category.
Engine Formulation
2-4-6 Metal Treatment
Penetrating Lubricant
XL-2 Two Stroke Metal Treatment
Engine Formulation is a unique 100% pure petroleum-based metal treatment that is compatible with all motor oils, including synthetics. This product is engineered specifically for the internal combustion engine (Gasoline, Diesel, Natural Gas or Propane) and should not be confused with ordinary additives which have marginal benefits. It is a metal treatment which uses a 30W re-refined vbase oil but does not replace your engine's oil.
It coats all metal surfaces with a layer of positively charged ionic oil molecules and will protect your engine from the 90% of engine wear that occurs during cold starts. It reduces friction and wear and hence will extend the life of your oil and improve its lubricating qualitites. Do not confuse these products with those available in the market claiming to do the same job. Our products do not contain plastic particles, PTFE resins (Teflon), or any such harmful items.
Benefits:
Benefits for Turbo-Chargers:
Available Sizes:
#30001 - 473 ml (16 oz. US) bottle
• A "lighter" and "quicker" vehicle response
• Smoother rise in RPM's resulting in a quieter and smoother engine
• Overall improved engine response and quicker acceleration
• An increase in top end RPM's and an increase in idling speed
• Less decrease in speed while going up a hill at a constant accelerator pressure. (Many users can now even negotiate hills without down-shifting.)
• Easier cold weather starting
• Releasing of rings that are fouled or frozen (from hydrocarbon or the residue from other additives).
• Reduction of the vehicle's use of oil
• Maximizing of compression and horesepower
• Reduction of hydrocarbon emissions
• Improvement in fuel efficiency due to reduction of friction in the lower engine
• Improvement in compression ratios due to the removal of the deposits
• Reducing heat caused by friction
• Improving heat transfer and reducing wear on bearings due to the residue's abrasive action (which can lead to early seizure of the bearings and surrounding metal).
• Protecting thrust and primary bearings
• Slowing carbonization and oxidation of oil in and around heat-stressed bearings
• Reducing scaling and build-up
• Protecting during metal-to-metal contact
• Breaking down deposits of carbon on surfaces where this residue is already evident
#30021 - 235 ml (8 oz. US) bottle
#30041 - 4L (1 gallon US) jug
#30061 - 10L (2.5 gallon US) pail
2-4-6 Metal Treatment is named after the directions for its most common application (i.e. 2oz. in the power steering reservoir of your steering box, 4oz. in the differential and 6oz. in the automatic transmission or manual gear box). It is designed to reduce friction in extreme pressure situations, contributing to a reduction in wear and operating temperatures. It works in the same manner as all our other lubricants, coating metal with a protective layer of positively charged oil molecules. It will actually be attracted into areas of high wear because the extra friction creates extra heat and so an extra negative charge, whereas a conventional oil will run away from that area. The reduction in the friction leads to less waste of energy (energy lost in the form of heat and noise). This means that more energy is free to pass through the drive train, providing an improvement in horsepower or power output at the wheels.
Benefits:
Available Sizes:
#30361 - 354 ml (12 oz. US) bottle
• Manual gears shifting more smoothly. (Before starting your engine, shift through the gears. Compare the feeling "before" and "after" adding 2-4-6 Metal Treatment. The "catching" or "corners" feeling should have been reduced as you shift through the gears. In other words, shifting is quicker and without "grabbing".)
• Less vibration of the gear shift might also be evident
• Less torque loss translates into an increase in actual power to the drive train / wheels
• Smoother, faster shifting of gears in automatic transmissions
• Reduction of transmission gear howl and vibration
• Reduced operating temperatures
• Reduced differential noise (gear howl)
• Easier steering maneuvers
• Increased pump flow in worn or dirty power steering units
• Increase in life expectancy of unit due to decreased wear
#30381 - 4L (1 gallon US) jug
#30401 - 10L (2.5 gallon US) pail
Our Penetrating Lubricant is a scientifically blended formula containing the unique molecular engineering metal treatment, which coats and protects metal with a layer of polarized oil. This product has "NO EQUAL" in the world whenever rust, corrosion or drag is a factor. The Penetrating Lubricant not only penetrates through extreme rust and corrosion, it also treats the metal surface with a polarized layer of oil molecules to reduce friction and wear and retard future corrosion.
Our Penetrating Lubricant differs from others in that the oil will actively seek out metal to protect and treat. Use of this product provides for a long lasting, smoother operation of any metal mechanism.
The application and benefit ranges are huge! It can be used for the most simple of home needs or the most challenging of industrial applications. The Penetrating Lubricant is highly recommended for general machine shop work, drilling and tapping. (For heavier duty applications, use of the 2-4-6 Metal Treatment may be a more suitable choice.) It is ideal for agricultural machinery or sports equipment, since it does not collect dust.
Benefits:
A Few of the many Applications:
Available Sizes:
#30261 - 30 ml (1 oz. US) squeeze bottle
• FAST Penetration
• Breaks down "rust" and "corrosion"
• Lubricates as it penetrates
• Displaces water
• Cleans and retards electrical corrosion
• Resistant to most "acids" and "caustics"
• Prevents rust and corrosion after use
• Speeds up drilling and tapping
• Cutting edges stay sharper longer
• Reduces power consumption
(There are literally thousands of uses for this product)
• Sliding doors, windows, screens
• Hinges, locks, hoods (automobile)
• Valves and chains
• Rusty bolts / screws
• Electric and Air tools
• Screw jacks
• Sporting equipment
• Agricultural equipment / machinery
• Vehicle doors
• Bicycles, scooters, motorcycles
• Electrical terminals
• Sewing Machines
• Drill bits and taps
#30281 - 200 g (7 oz. US) aerosol can
#30301 - 4L (1 gallon US) jug
#30321 - 10L (2.5 gallon US) pail
The XL-2 Two Stroke Metal Treatment (for Two-Stroke applications only) is uniquely engineered to add lubricity to your mixed gas and to coat all metal surfaces with a layer of positively charged oil. It is compatible with ALL two-stroke applications. It will dramatically reduce engine wear and noise due to friction and drag in the system. As a result, operating temperatures will drop and the likelihood of catastophic seizure will be diminished. It will clean and protect your engine from hydrocarbon build-up, ensuring spark plugs and rings remain free to operate at their maximum potential. The XL-2 Two Stroke Metal Treatment dramatically improves the power output, compression and efficency of the engine. It makes cold starts easier and reduces the wear caused by them. This product raises idle and top-end RPM's as well as top speed and horsepower. It does NOT replace the oil, but enhances its performance and treats the metal.
Benefits:
Available Sizes:
#30441 - 354 ml (12 oz. US) bottle
• Increased power due to lower operating temperature and reduced friction
• Increased compression because of improved piston ring sealing
• Decreased deposits on spark plugs, combustion chamber and pistons
• Protects agains piston seizure
• Quieter and smootheer running engine
#30461 - 4L (1 gallon US) jug
#30481 - 10L (2.5 gallon US) pail
|